Interior wall mesh fabric is widely used in our lives, especially in the field of pipe insulation. So, what are the installation steps for interior wall mesh fabric? Let's take a look at the relevant introduction to interior wall mesh fabric installation.
Interior Wall Mesh Fabric Installation:
1. Keep the wall surface clean and dry.
2. Apply tape to the crack and press it firmly.
3. Confirm that the crack is covered by tape, then cut off any excess tape with a knife, and finally apply mortar.
4. Let it air dry naturally, then lightly sand it.
5. Fill with sufficient paint to make the surface smooth.
6. Cut off any excess tape. Then, ensure all cracks have been properly repaired, and use a fine composite material to finish around the repaired areas, making it look brand new.
Mesh fabric is made from medium-alkali or alkali-free woven fiberglass fabric with an alkali-resistant coating. This product has high strength and good alkali resistance, playing an important structural role in insulation systems, primarily preventing crack formation.
Due to its excellent resistance to corrosion from acids, alkalis and other chemicals, as well as its high tensile strength in both warp and weft directions, it can evenly distribute the stress on the external wall insulation system, avoid deformation of the entire insulation structure caused by external impacts and compressions, give the insulation layer high impact resistance, and make it easy to construct and control quality, thus acting as a "soft steel bar" in the insulation system.
